Brake Pads | Brake Rotors | Brake Calipers
The Hyundai Kona N brake system is comprised of the following key components:
- Heat Shield or dust shield helps limit grime buildup thereby lengthening the life of your brake system.
- Anti-lock Braking System pump and a computer allows your car to keep traction on the road continuously.
- Backing plate & return spring holds your Hyundai Kona N braking system together so it can function perfectly.
- Master cylinder or hydraulic cylinder converts the pressure you put on your Hyundai Kona N brake pedals to power the rest of your brake system by feeding brake fluid into the brake circuit.
- Brake Calipers squeeze the brake pads up against your Hyundai Kona N rotors to slow or stop your car.
- Brake Hoses transmit brake fluid from the brake line to your Hyundai Kona N brake calipers. It's made of rubber and is flexible so that it can move with the suspension. These hoses need to be examined repeatedly for cracks and other symptoms of deterioration. Check your Hyundai Kona N maintenance schedule for more information on when your hoses should be replaced.
- Brake pads or shoes are the components that physically make contact with your brake rotor and apply pressure or friction to slow and stop your wheels from turning. It's exceedingly critical to keep Hyundai Kona N brake pads fresh by replacing them as they undergo quite a bit of stress each time they are used. Check your Hyundai Kona N maintenance schedule for the recommended mileage intervals.
- Rotors still called discs or drums are what your pads grip in order to stop the wheels from spinning. There are many types of brake rotors (Blank or "smooth" rotors, Cross-drilled rotors, slotted, drilled and slotted). Let find the best type of brake rotors for your Hyundai Kona N
- Parking Brake cable or adjuster is a steel cable used to trigger the parking brakes. When the lever is used or pedal depressed, the cable pulls the calipers or drums to initiate the parking brake of your Hyundai Kona N.
Brake pads consist of two layers: a metal backing plate and a high-friction material that includes rubber, fiber, carbon & other materials. Over time, brake pads wear down and can even start squeaking. This noise is the metal backing plate & the rotor touching, which also acts as a safety measure to let you know your brakes need repair. This can also cause damage to your rotors and, in some cases, can even start distorting them. In addition to serving as a "platform" for the friction material, the backing plate also protects the brake caliper from disproportionate heat buildup.
Brake calipers cover the rotors and contain pistons. The amount of pistons depends on the type of brake system. Brake fluid from the master cylinder forces these pistons to maneuver the brake pads against the disc. The brake caliper will evenly distribute pressure against the brake disc. Generally, the more pistons in a caliper, the more evenly the pressure from the pads is spread onto the brake disc.
Can I just replace brake pads and not rotors?
Yes, your Hyundai Kona N rotors will regularly last longer than your brake pads as long as you replace your pads before doing damage to your calipers or rotors. By not replacing your brake Hyundai Kona N pads in a routine manner you can damage the other parts.
Hyundai Kona N Front Brake Pads & Rotor Replacement
Wear and tear on your brakes depends considerably on your driving habits and the type of brake pads your Hyundai Kona N has, but ordinarily front brakes wear out before rear breaks at 30,000 - 60,000 miles because they are usually under much less stress.
Hyundai Kona N Brake Specials
We're the highest-rated service department in Phoenix with OEM-trained mechanics, complimentary Wi-Fi and coffee, rental cars, Lyft Service Shuttle On Demand, and more! Larry H. Miller Hyundai Peoria offers incredible prices on brake service, brake pad replacement, and rotor resurfacing or replacement in Phoenix. Not only will you receive an exciting discount on your brake service but you'll again get to endure the many perks of doing business with Larry H. Miller Hyundai Peoria. You can explore one of our extraordinary brake specials above and schedule your appointment online for extra savings. So explore our distinct offers including free standard diagnostics and book your service online today or call us at 6232446778.
Why choose Larry H. Miller Hyundai Peoria for all your Hyundai Kona N brake needs
Most auto repair shops are fine with fixing one issue at a time, but not us. At Larry H. Miller Hyundai Peoria, our Service Center strives to correctly diagnose/fix your car the first time. This saves you hours at the store, as well capital on excessive repairs or extraneous auto repair. We are proud to serve all Hyundai owners and are the best location to service your Hyundai car, truck or SUV in Phoenix and the greater metro area. Contact our Service Center today to schedule your service appointment or to find the shop hours for the best appointment time for you or visit the store. Even if it's just for a quick multi-point examination or alignment check, our team will be more than glad to help you.
What will my brake service include when I visit Larry H. Miller Hyundai Peoria?
This can be a more complicated question to answer. Since there are many parts to a brake system, there are different items that may be necessary for your service. Some vehicles may just need new brake pads, others may need a brake fluid flush, while some may need a resurfacing of rotors and new brake lines due to leaking brake fluid. Depending on the results of the multi-point examination, your Hyundai Kona N brake service may include:
- New Brake Hoses/Brake Lines
- Brake Fluid Flush & Brake Fluid Replacement
- Brake pad Replacement
- New Brake Rotors / Brake Drums Resurfaced
- Brake Caliper Replacement
- Brake Master Cylinder Replacement
- Brake Rotor & Brake Caliper Alignment
What is involved in a Brake System Inspection? Checking Hyundai Kona N Brake Parts & Brake Systems
At Larry H. Miller Hyundai Peoria, we offer a multi-point examination with each service visit that includes perfectly inspecting your Hyundai Kona N brakes, brake pads, rotors, operation, belts, hoses and filters, among other items, not just your brake system. Our remarkably accomplished mechanics will again look at the following when inspecting your brakes:
- Brake Fluid - Checking brake fluid levels, color and signs of obvious brake fluid leaks
- Cylinders - check wheel cylinders & brake master cylinder for function
- Brake Operation & Parts - such as Brake Pad Thickness & hardware for excessive wear and tear
- Rotors / Brake Drums - determining if resurfacing or restoration is required
- Brake hoses - problems with the hoses, like cracking or clogs are extremely typical and need to be checked always as they can wear over time
How much does a Hyundai Kona N Brake Flush cost?
Proper vehicle inspections and basic maintenance like a brake flush can impede you from having to deal with pricey repairs in the future. Bring your Hyundai Kona N to our location to ensure your brake system is operating perfectly. We can check your brake pads, fluid levels, rotors, calipers, brackets and everything in your brake system.
How much do new rotors cost?
It depends on whether you need your Hyundai Kona N rotors replaced or simply resurfaced. At Larry H. Miller Hyundai Peoria we'll have one of our Hyundai Kona N technicians examine your car to give you a recommendation and estimate. As stated prior, since we are able to order parts directly from Hyundai we can save you time and money replacing your Kona N rotors.
Hyundai Kona N Rear Brake Pads & Rotor Replacement
Rear brake parts typically wear out well after the front brakes due to the level of stress required to slow a car. Some rear brakes can last up to 50,0000 - 80,000 miles, but you should ask your Hyundai Kona N service manual for advised maintenance intervals for all parts. Keep in mind you should repeatedly have your service department perform a multipoint check which includes inspecting your brake system.
How often do brake rotors need to be replaced?
Hyundai Kona N rotors should be replaced by 70,000 miles but may wear out faster depending on your driving habits and a host of other factors. Usually you will need to change rotors in pairs starting with the front axle of your Hyundai Kona N as they tend to wear out quicker. Schedule an appointment online with Larry H. Miller Hyundai Peoria to get a free multipoint inspection on your complete brake system.
Hyundai Kona N Brake Fluid
Where does brake fluid come into the equation? The brake fluid or hydraulic fluid is responsible for moving the parts of your Hyundai Kona N brake system. Fresh brake fluid is something few people think about, even though it can seriously affect braking performance. Brake fluid should be changed usually. Confer your Hyundai Kona N maintenance manual for facts on exact mileage intervals.You can even schedule your appointment online. For any brake related questions or concerns, reach out to our Hyundai experts at Larry H. Miller Hyundai Peoria.
How long do Hyundai Kona N brake rotors last?
This depends massively on the type of rotors, your driving style, and the type of vehicle you're driving. Hyundai Kona N rotors need to be replaced each 30,000 - 80,000 miles depending on the factors above. Confer with your Hyundai maintenance manual for more advice. Remember, it's consistently a good idea to have your complete brake system examined by a franchise dealer with the correct training to spot potential issues before they cause damage to other components of your Hyundai Kona N brake system. Larry H. Miller Hyundai Peoria offers an assortment of brake specials including free diagnostics. Call us at 6232446778 or schedule an appointment online today!
How much do new brake pads cost?
Hyundai Kona N brake pads can cost anywhere between $150 per axle and $450 per axle depending on the type of brake pad desired. In some rare cases, they can be even more if the manufacturer requires a exact type of brake pad to be ordered for your Hyundai Kona N. Contact Larry H. Miller Hyundai Peoria today at 6232446778 or schedule your brake service online.
Hyundai Kona N Brake Specials near Phoenix
Larry H. Miller Hyundai Peoria located near Phoenix is the highest-rated service & repair center in a distinct position to support you with all your automotive needs. Our Hyundai Kona N team is capable of diagnosing any problem your vehicle may have and give you the facts you need to make a decision on repairs. No salesmanship, just great client service which is why we are rated the top brake repair shop in Peoria! An industry leader in parts & service, we have service advisers on standby ready to support you with diagnostics & repairs.
Should I replace all 4 rotors?
Typically you will need to change at least 2 rotors at a time. Frequently, your Hyundai Kona N front rotors will wear and tear faster than the rear rotors, but this depends on a variety of different factors. Ask Larry H. Miller Hyundai Peoria for more details by dialing 6232446778 and ask for a multipoint inspection of your entire braking system. At our Hyundai diagnostics are free during any visit.
How much does a brake job cost?
Hyundai Kona N Brake rotor restoration can cost anywhere between $300 - $750 for all four rotors to be replaced. This price estimate includes labor and parts. At Larry H. Miller Hyundai Peoria we have a variety of brake specials & coupons to save you money! Because we are supplied OEM parts directly from the manufacturer, we are able to locate parts at wholesale prices and pass those savings to our consumers unlike non-franchise service centers or Hyundai Kona N brake repair shops. We also specialize in Hyundai Kona N brake repair saving you on labor costs by getting your vehicle's brake job finished in an efficient manner.
Brake pads for a Hyundai Kona N can cost anywhere between $150 per axle and $450 per axle depending on the type of brake pad required.
Resurfacing rotors is much cheaper than replacing them. Ask us about the chance of simply resurfacing your Hyundai Kona N rotors rather than replacing them.
What are the signs and symptoms of bad Hyundai Kona N brake rotors or pads?
Just like there are common brake issues, there are very obvious signs that can signify the cause of a brake problem. Warning signs include a shaky steering wheel, trouble stopping or a loud metal scraping sound are all indicators that you need to check your Hyundai Kona N brakes. Nonetheless, there are many other, and less clear, indicators that your Hyundai Kona N brakes may be showing which you don’t want to ignore.
When do I need to get my brakes inspected? Schedule your appointment with Larry H. Miller Hyundai Peoria if you experience any of the following:
- Your vehicle doesn't stay straight when you brake, pulling in either direction
- You have grinding, squeaking or squealing brakes
- The brake pedal presses farther to the floor than usual or seems loose, or may require more force than usual
- Your car is wobbling or rocking when driving at high speeds
- Unusual vibrations, shaking or exceptionally loud noises occur during braking
- You are over the number of miles that Hyundai suggests between brake fluid exchanges for your vehicle
- It’s been over a year or 12,000 miles. Brake inspections should be at least once a year. (Larry H. Miller Hyundai Peoria offers a free multi-point examination every visit)
- It takes your vehicle exceptionally longer distances to stop than normal
- Your Check Engine or Brake Warning light on your dashboard comes on
Larry H. Miller Hyundai Peoria has the best brake mechanics & brake repair inPhoenix
We offer service and repair for brake pads, calipers, rotors, brake lines, master cylinder, brake fluid flush, and much more. Our Hyundai Kona N Certified technicians provide expert diagnostics, fast & reliable maintenance & brake repair for your car. Contact Larry H. Miller Hyundai Peoria when you need quality brake service in Phoenix AZ. If you have any questions about brake squealing or brake issues please reach out to our team. You can likewise click here to Schedule your service appointment today.
