Hyundai Kona Electric Check Engine Light

Is it safe to drive your Hyundai Kona Electric with the check engine light on?

If the check engine light is flashing, this means that there is a serious issue and it is suggested to service your Hyundai Kona Electric quickly. This question is not very simple because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be secure to drive. This is generally indicated by a steady glow of the check engine light. If you notice a difference in the performance of the car, it could be an indication of a more serious problem. Call the experts at Larry H. Miller Hyundai Peoria by dialing 6232446778 so you can describe the issues. Or lessen your speed and bring your Hyundai to our certified mechanics as soon as imaginable.

How much does it cost to get the engine light checked?

The check engine light warns of issues ranging from a gas cap that's not perfectly tightened to a more serious failure like a bad catalytic converter or a problem with one of the car's oxygen sensors, so it good to get the correct code reading and diagnosis. The average cost for a check engine light diagnosis & testing is typically between $88 and $111. The good news, Larry H. Miller Hyundai Peoria offers entirely complimentary multi-point inspections and free diagnostics, in most cases, to support determine the cause of your check engine light.

What Does the Check Engine Light Mean?

One of the most commonly misunderstood lights or indicators in your Hyundai Kona Electric is the check engine light. The check engine light is part of the important onboard diagnostics system, and displays in a wide range of different ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light illuminates in either an amber or red color and is part of the diagnostics system found on your car. Onboard computers increasingly have controlled and monitored car performance since the 80s and do a wide range of things for your Hyundai Kona Electric. Some of these essential duties include shifting automatic transmissions ignition timing, controlling engine speed, and implementing cohesion control, just to name a few. With that being said, the check engine light can mean an assortment of different things. It can be as simple as your gas cap being loose or as perilous as engine knocking. If your check engine light is on in your Hyundai Kona Electric, contact Larry H. Miller Hyundai Peoria. Our Hyundai service department can support you find out what code is turning your check engine light on or diagnose why your check engine light is flashing. Contact Larry H. Miller Hyundai Peoria today!

How many miles can you drive with the check engine light?

It could be anything from a bad sensor to plug wires needing to be replaced. Since each check engine code has its own level of severity, it is typically difficult to predict how many miles you can be secure in driving with the warning light on. The safest bet is to decipher the code and then plan your strategy accordingly. If you check engine light is flashing, we suggest that you pull over and contact Larry H. Miller Hyundai Peoria to help determine if your vehicle is secure to drive in or if we suggest a tow truck.

Hyundai Kona Electric Check Engine Light Flashing

Although there are countless potential causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are various common causes including something as simple as a loose gas cap. Other often common reasons for a Check Engine Light are faulty emissions control part, dirty mass airflow sensor, damaged oxygen sensor, a malfunction with the fuel injection system, broken head gasket, or damaged spark plugs to name a few. No matter what is the root cause of the Check Engine Light, we have the Hyundai Certified Mechanics and the certified service protocol to isolate the root problem and totally repair it as necessary to restore factory specifications. When this results, the Check Engine Light turns off, and you can leave the service center knowing that your Hyundai issue was totally fixed.

Every Hyundai Kona Electric was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the vehicle on its critical systems. The rapid sensors are continually detecting conditions while sending vital data to the electronic control unit. If the electronic control unit detects that the data is out of factory specifications, the Check Engine Light illuminates telling you that there is a problem. Nevertheless, unfortunately that is the limitation of the Check Engine Light – it won’t tell you what definitely is wrong nor what to do about it. That’s where we come in; Larry H. Miller Hyundai Peoria provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Extremely Certified Service professional.

Will the check engine light reset itself?

The check engine light on your Hyundai Kona Electric will frequently shut itself off if the issue or code that caused it to turn on is fixed. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will quickly turn itself off. Still, if your catalytic converter is working correctly, and you did a lot of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your Hyundai Kona Electric light will go off after about 20-40 miles. If you drive over that amount and the light is still on, you will need to bring it in to Larry H. Miller Hyundai Peoria so the light and code can be double-checked and reset.

Hyundai Kona Electric Check Engine Light

A flashing light indicates that the problem is very serious and if not taken care of expeditiously may result in major and serious damage to the car. If the check engine light in your Hyundai Kona Electric starts flashing, that means that the problem needs attention expeditiously and your Hyundai should be brought in instantly. This blinking light normally reveals a severe engine misfire allowing unburned fuel to be dumped into the exhaust system. There it can expeditiously raise the temperature of the catalytic converter to a point where damage is likely, requiring an pricey and extensive repair. Some owners ask if spark plugs cause the check engine light to flash? This can exactly be the cause. A faulty, old or dirty spark plug can cause the engine to misfire. If the problem is completely ignored or you continue to drive, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a very pricey repair. If your check engine light is regularly flashing, please contact our team of automotive experts at Larry H. Miller Hyundai Peoria quickly by calling 6232446778.

What could cause the check engine light to come on in a Hyundai Kona Electric?

When your check engine light comes on, this could be as simple as tightening or replacing your gas cap. Also, the check engine light could still be a warning of a serious problem that could cause serious damage to your engine and come with a hefty and expensive repair bill. Depending on your make and model, the check engine light will illuminate or blink. A steady and continuous glow ordinarily means something less serious but a flashing check engine light signifies that your vehicle’s engine is in serious trouble and useful service is needed quickly. If your check engine light is flashing in your Hyundai Kona Electric, we remarkably recommend not to drive the vehicle and schedule Hyundai service today. Below is a list of the most common reasons your check engine light can come on:

• Your catalytic converter is bad or going bad. The catalytic converter is a part of your Hyundai Kona Electric’s exhaust system. The catalytic converter's function is to turn the carbon monoxide created by the combustion process into carbon dioxide. A broken catalytic converter is usually caused by repeatedly neglected maintenance, which is why Larry H. Miller Hyundai Peoria offers a free multi-point check with each Hyundai service. If you have an issue with your catalytic converter and don't get it repaired, your Hyundai Kona Electric will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your car may run at a higher temperature, too, which can cause other delicate problems from overheating.
• Issues with any aftermarket items. An aftermarket alarm, exhaust or other item can wreak extreme havoc on your Hyundai Kona Electric if it’s not installed perfectly. These aftermarket parts and accessories can drain the battery, trigger the check engine light, or even impede the vehicle from starting. If these issues sound familiar, bring your Kona Electric to Hyundai and have our team of gifted certified mechanics ensure that your aftermarket items were installed correctly and aren't causing any issue. Getting accessories, especially aftermarket parts and accessories, or using OEM parts first place might cost a little bit more but could help you save substantially from having to get poor work and damage caused by poor installation work corrected.
• Your O2 Sensor (Oxygen Sensor) needs to be replaced. The Oxygen sensor, known as the O2 sensor, measures the amount of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns more swiftly and your vehicle will be less efficient when it comes to fuel economy. So what hits if I don’t replace your O2 sensor? A defective sensor can not only affect your miles per gallon, but it can cause significant damage to your catalytic converter and your Hyundai Kona Electric's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to determine the precisely correct mixture of air and fuel that enters the cylinders in your engine. A defective O2 sensor can likewise cause a car to fail an emissions test.
• Your mass airflow sensor (known as MAF) needs to be replaced. The mass airflow sensor in your Hyundai Kona Electric is what determines how much fuel is necessary to run your engine efficiently by measuring the amount of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to certain changes, like altitude. If your Hyundai Kona Electric is having trouble starting, idling rough or has a sudden quick replace in the position of the throttle pedal, this could be a crucial sign of a defective mass airflow sensor.
• New Spark Plugs or Plug Wires are necessary for your Hyundai Kona Electric. The spark plugs are the part of your engine that ignites the air/fuel mixture in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run smooth. The spark plug wires deliver the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are bad or old, you will go through a evident poor performance and decreased power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or damage to ignition coils and O2 sensors, leading to more pricey repairs.
• The battery is low or dead. The battery in your Hyundai Kona Electric is each essential. Without a car battery, your car won’t start, light up the road ahead, play the radio or charge your phone. Today’s car batteries last much longer than they did a few decades ago, and they don't absolutely require maintenance. The price of a new one depends on the type of Hyundai you drive, but check our current service coupons and specials.
• Your Hyundai Kona Electric has a vacuum leak. Each Hyundai Kona Electric has a vacuum system that performs a wide variety of functions. The vacuum system likewise helps lower unhealthy emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can dry out and crack, especially if they’re exposed to intense heat or extreme cold.
• One of the most common and frequent cause is that your Hyundai Kona Electric gas cap is loose, broken or missing. The gas cap for your Hyundai Kona Electric serves various purposes. It prevents dangerous gas fumes from being released when you aren't driving, it seals the fuel system and helps manage pressure within the fuel tank. What hits if you have a defective fuel cap? If your gas cap is old or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump and be more expensive. Luckily, to replace a gas cap isn't pricey. If your check engine light turns on instantly after you put gas in your Hyundai Kona Electric, first thing you should check is to make sure the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.

Check Engine Light Service Hyundai Kona Electric

What do you do when you’re driving along in your Hyundai Kona Electric and suddenly, a yellow light illuminates on your dash and says "Check Engine". If you’re like most Hyundai owners, your heart sinks drastically because you may have precisely idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the cost of the unknown) can be just as stressful. But take a deep, tranquil breath and realize the light coming on doesn’t mean you have to pull the vehicle over to the side of the road and call a tow truck, but it is recommended that you get your Hyundai Kona Electric checked swiftly. Ignoring that warning could end up causing significant, huge damage to pricey engine components.

When your Hyundai Kona Electric's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electronic control system that it can’t appropriate, a computer turns on your check engine light. This amber or yellow light is ordinarily labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that can quickly identify the issue, whether it's a sensor or a failing engine part. This code is read with an electronic scan tool that is used by our Hyundai auto repair mechanics at Larry H. Miller Hyundai Peoria. There are likewise a number of comparatively inexpensive code readers that are designed for do-it-yourselfers, should you choose that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an experienced professional to determine the exactly correct issue and repair it.

Hyundai Kona Electric Check Engine Light Codes

The check engine light turning on can be quite intimidating, exceptionally to see that little light on your vehicle’s dashboard suddenly illuminate, but in reality, it is not something that should cause you to shut down in fear right away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, again known as the OBD (on-board computer diagnostic system) in your Kona Electric. There are hundreds of different codes that your check engine light can accurately represent. While that sounds daunting, with a little patience, tackling basic diagnostics will give you advantageous knowledge about your car and will again allow that essential Check Engine Light to do what it is really supposed to do: be your guide. Sadly, evident and helpful car symptoms do not constantly accompany an illuminated Check Engine Light. Since there are hundreds of possible OBD codes, there are again hundreds of possible reasons for the light, including:

• Transmission issues
• Ignition system faults
• O2 Sensor
• Loose Gas Cap or Missing Gas Cap
• Old Battery
• Computer output circuit issues
• Emissions controls issues
• Bad Spark Plugs
• Fuel and air metering systems problems

This is why it is important for someone who does not have a lot of predominant automotive knowledge to not assume what a code means. Call Larry H. Miller Hyundai Peoria at 6232446778 today or schedule your check engine light service online today! When your check engine light comes on, you should get it checked out expeditiously by a adept certified Hyundai mechanic. If the engine light comes on due to a serious concern, you risk damaging your car further by not repairing the issue right away.