2024 Hyundai Palisade Oil Filter in Peoria, AZ

Yes—the oil filter is replaced with the oil to maintain full filtration and flow.

A loaded filter can trigger its bypass valve, allowing unfiltered oil to circulate so the engine still runs but without proper debris removal. Replacing the filter at each oil change restores the filter’s capacity and keeps wear particles from recirculating. Follow the manufacturer’s schedule and your driving conditions when planning service.

• Fresh media captures new debris effectively
• Reduces the chance of the bypass valve opening
• Supports stable oil pressure and component protection

The old filter is removed, sealing surfaces are renewed, a matched new filter is installed, and the engine is run and checked for leaks.

Technicians also apply clean oil to the new gasket, verify proper torque and fit, and top off oil after circulation. The work pairs with filling the engine with the oil grade the manufacturer specifies for this V6. A final inspection confirms no seepage at the filter or drain plug.

• Filter matched to the 3.8‑liter V6 installed
• Gasket lightly oiled and seated evenly
• Post‑start leak and level verification

The filter can load up, open its bypass valve, and let unfiltered oil circulate—quietly increasing wear.

While oil flow continues, the debris the filter should trap can move through bearings and valvetrain surfaces. Over time, that accelerates component wear and can affect pressure stability. Regular oil and filter service preserves filtration capacity and helps the engine maintain smooth operation.

• Bypass protects flow but sacrifices filtration
• Microscopic particles recirculate and abrade parts
• Timely replacement restores protective function

Yes—the filter is matched to the 3.8‑liter, 6‑cylinder engine and filters are not interchangeable across engines.

Correct fit ensures proper sealing, flow rate, and bypass characteristics designed for this V6. Using the wrong filter can risk leaks, pressure issues, or ineffective filtration. Your service advisor will install a filter that meets the requirements for the 2024 Hyundai Palisade without you needing to track part numbers.

• Engine displacement: 3.8 liters; cylinders: 6
• Designed for correct bypass and flow performance
• Proper sealing prevents leaks after heat cycles

It can be done, but it’s not recommended because the used filter may bypass and allow unfiltered oil to circulate.

Changing oil alone leaves a partially loaded filter in place, reducing debris capacity from the first miles after service. Replacing the filter with the oil restores both lubricant quality and filtration headroom. Follow the manufacturer’s guidance and your driving conditions when deciding service timing.

• Filter capacity resets only with a new filter
• Helps stabilize oil pressure and flow
• Supports long-term wear protection

Use the online portal to schedule service or call the store for help.

Pick a time, add your 2024 Hyundai Palisade details, and note any concerns you want checked during your visit. You can also review current service specials before finalizing your schedule appointment. Our team in Peoria will confirm and get you in and out efficiently.

• Book online 24/7 with your VIN or model info
• Add transportation or timing notes as needed
• Receive confirmations and reminders by your preference