2024 Hyundai IONIQ 5 Tires in Peoria, AZ

Most owners have tires rotated at every service visit, and the manufacturer’s schedule for the 2024 Hyundai IONIQ 5 is what ultimately decides the interval.

Driving style, road conditions, and how evenly the tires are wearing all influence timing. A quick inspection of tread depth across each tire helps confirm whether you’re on track. Combining rotation with other routine services makes it easy to stay consistent. When in doubt, follow the maintenance schedule in the owner resources and have a technician verify wear patterns.

• Rotate with routine maintenance for consistency
• Confirm timing by inspecting tread wear across all tires
• Follow the vehicle’s maintenance schedule as the final word

A typical tire service includes inspection, tread-depth measurements, pressure checks and adjustments to the placard, manufacturer-specified rotation, proper torque, and a TPMS reset if needed.

Technicians look for uneven wear, damage, and embedded objects, then document findings. Pressures are set cold to the values on the door placard, supporting range and handling. The rotation pattern follows manufacturer guidance for this rear-wheel-drive EV and accounts for tire design. A final check confirms smoothness and steering feel.

• Visual and measured assessment of each tire’s condition
• Pressures adjusted to the vehicle placard
• Rotation performed per manufacturer guidance

The rotation pattern depends on drivetrain and tire fitment; the 2024 Hyundai IONIQ 5 is rear-wheel drive, and directional or staggered tires can change the pattern used.

Technicians select the appropriate pattern after confirming whether the tires are directional and whether front and rear sizes match. They also consider wear tendencies from RWD torque delivery and steering loads. The goal is even wear and consistent handling without compromising tire design.

• Pattern chosen to match RWD layout and tire construction
• Directional tread requires side-specific moves
• Staggered sizing limits front-to-rear swaps

On this rear-wheel-drive vehicle, pairs can sometimes be replaced together, but an inspection of tread depth and tire condition determines the safest approach.

Even wear from regular rotation may allow two-tire replacement; uneven wear or age may warrant four. Matching tread depth, construction, and type helps maintain predictable braking and stability. Your service advisor will measure and recommend what keeps the set balanced.

• Measure tread depth across all four positions
• Match tire type and construction on the same axle
• Consider four tires if wear or age varies significantly

Replace when tread is worn to the built-in wear bars, when damage is found, or when age and cracking compromise integrity.

Use the tread-depth wear indicators molded between grooves, or do a simple penny test to gauge remaining tread. Watch for shoulder wear, cupping, sidewall bubbles, or frequent pressure loss. If the vehicle vibrates or pulls, have a technician inspect for uneven wear or internal damage.

• Check wear bars across multiple points on each tire
• Look for cuts, bulges, or exposed cords
• Note vibration, pulling, or rising road noise

Use the online scheduler to choose a time, or call the service team for help booking.

Pick your 2024 Hyundai IONIQ 5, select tire service, and add any notes about wear or vibration so we can prepare. You can also review current service specials before you finalize. If you prefer, call and we’ll set everything up.

• Schedule service in minutes
• Share symptoms or requests in the appointment notes
• Call for assistance if you have questions about options