2024 Hyundai Elantra Hybrid Oil Filter in Peoria, AZ

Yes—the oil filter should be replaced at each oil change to keep debris from recirculating.

The filter traps particles the oil carries away; as it loads, a bypass valve can open so oil keeps flowing but no longer passes through the media. That means unfiltered oil circulates, which quietly increases wear. Replacing the filter with the oil restores filtration capacity and maintains consistent protection.

• Fresh, engine-matched filter installed every oil service
• Prevents bypass and unfiltered oil circulation
• Supports stable performance and longevity

The old filter is removed, sealing surfaces are renewed, a matched new filter is installed, and a run-and-leak check is performed after refilling with fresh oil.

Technicians clean the filter base, fit the new gasketed filter to proper tightness, address the drain plug sealing surface, and add oil of the manufacturer-specified grade. After starting the engine, they verify pressure and check for leaks around the filter and drain plug.

• Correct filter fitment and gasket seating
• Drain plug and filter area inspected for leaks
• Final level check after the engine has run

The filter can load up, trigger the bypass valve, and let unfiltered oil circulate through the engine.

While the engine still receives oil flow, it may carry abrasive particles that the saturated filter can no longer hold. Over time, that quiet increase in unfiltered circulation can accelerate wear and degrade performance. Replacing the filter with the oil helps avoid this condition.

• Higher risk of unfiltered oil due to bypass
• Increased internal wear over time
• Less consistent performance and efficiency

Yes—the filter is matched to this 1.6-liter inline 4-cylinder engine, and filters are not interchangeable across engines.

Correct fit ensures proper sealing, anti-drainback and bypass function, and media capacity. Using a non-matched filter can cause leaks or allow unfiltered oil to circulate if the bypass or sealing is incorrect. Service your vehicle with a filter selected for this exact engine.

• Engine-matched dimensions and sealing surfaces
• Bypass valve calibrated for the application
• Media capacity suited to the engine’s oil flow

It can be done, but it is not recommended because a loaded filter can force the bypass valve to open and circulate unfiltered oil.

Skipping the filter leaves old debris trapped in the media and reduces filtration margin for the fresh oil. The best practice is to replace the filter with every oil change to restore full debris-holding capacity and maintain reliable protection between services.

• Prevents early bypass and unfiltered flow
• Restores filtration capacity each service
• Supports consistent wear protection

Use our online tool to schedule service or call us at Larry H. Miller Hyundai Peoria.

Choose a time that fits your day, and we’ll handle the oil, engine-matched filter, sealing surfaces, and post-service leak check. Check current service specials before you book. Our facility is located at 8425 W Bell Rd, Peoria, AZ 85382 for convenient drop-off and pickup.

• Fast online scheduling and confirmation
• Clear scope: oil, filter, sealing, and leak check
• Location: 8425 W Bell Rd, Peoria, AZ 85382