2023 Hyundai NEXO Oil Filter in Peoria, AZ

Yes—replace the oil filter at every oil change on a 2023 Hyundai NEXO.

The filter traps debris; when it loads up, the bypass valve opens so oil keeps flowing but no longer passes through the media. Running unfiltered oil quietly increases wear. Replacing the filter with the oil restores full filtration and helps the new oil stay clean longer. Follow the manufacturer’s maintenance schedule for timing.

• New, model‑matched filter installed with fresh oil
• Bypass risk avoided by not reusing a loaded filter
• Cleaner oil for longer protection between services

The service includes removing the old filter, cleaning the sealing surface, installing a matched new filter, refilling with the specified oil, and leak‑checking.

Your technician drains the used oil, fits the correct filter for this engine, renews the gasket interface, and torques the filter properly. After refill, the vehicle is started and warmed so we can inspect for leaks at the filter and drain plug. The maintenance reminder is reset where applicable, and used oil and filters are recycled.

• Mounting pad cleaned; gasket sealing renewed
• Correct filter applied for this engine configuration
• Post‑run inspection confirms no leaks

The filter can load up, trigger its bypass valve, and circulate unfiltered oil that increases internal wear over time.

A clogged filter doesn’t starve the engine of oil; the bypass opens to maintain flow. That’s the quiet problem—oil is moving, but contaminants aren’t being captured. Debris can abrade surfaces and reduce oil life. Replacing the filter each time restores full filtration and supports stable oil pressure and cleanliness.

• Bypass mode means flow without filtration
• Increased wear from circulating debris
• Shortened service life of fresh oil

Yes—the filter is matched to this engine, and filters are not interchangeable across engines, including the 0‑cylinder hydrogen powertrain.

Correct fitment ensures the right media, bypass setting, and gasket geometry for proper sealing and flow. Using a generic or mismatched filter can compromise filtration or cause leaks. Your service advisor selects a filter that meets the manufacturer’s requirements for this exact configuration; part numbers vary by application.

• Engine‑matched filter for proper sealing and flow
• Bypass characteristics tuned to this application
• Avoids leaks and under‑filtration

It can be done, but it’s not recommended because the old filter can push the system into bypass and circulate unfiltered oil.

Fresh oil poured through a loaded filter is immediately contaminated by what the filter already holds. If the media is near capacity, the bypass valve may open and leave your engine running unfiltered. Pairing fresh oil with a new, correct filter maintains full protection and supports consistent oil pressure.

• Prevents bypass caused by a saturated filter
• Keeps new oil cleaner for longer
• Maintains designed filtration performance

Use our online portal to schedule service or call {{rooftop.phone}}.

Online scheduling lets you pick a time, note concerns, and view transportation options. You can also check current service specials before you book. Prefer to stop by? Visit us at 8425 W Bell Rd, Peoria, AZ 85382, just off Loop 101 in the Phoenix West Valley.

• Fast online check‑in and appointment times
• Access to current service offers
• Location convenient to Peoria and Glendale