2022 Hyundai Ioniq Plug-In Hybrid Tires in Peoria, AZ

Most owners have tires rotated at each service visit, and the manufacturer’s schedule for the 2022 Hyundai Ioniq Plug-In Hybrid is the final word.

Service intervals vary with driving conditions, load, and how your hatchback is used. Combining rotations with routine maintenance keeps wear balanced and easy to track. Your technician will check tread depth and patterns and recommend timing that fits your driving. When in doubt, follow the owner’s manual guidance.

• Rotate with every scheduled service for consistent wear.
• Adjust based on inspection findings and use.
• Follow the manufacturer’s maintenance schedule.

We inspect tread and sidewalls, rotate tires to the manufacturer’s pattern, set pressures to the vehicle placard, torque lugs, and verify TPMS operation.

The visit starts with measurements of tread depth across all positions and a visual check for punctures or uneven wear. After rotation, we set all cold pressures to the placard on the vehicle and recheck after torquing. You’ll receive results and any maintenance recommendations. Add the service when you schedule appointment.

• Tread-depth and condition inspection on all four tires.
• Rotation per manufacturer guidance for this vehicle.
• Pressure set to placard; lug nuts torqued; TPMS verified.

The rotation pattern follows the drivetrain and the tires fitted; this model is front-wheel drive, and directional tread or staggered setups change the pattern.

Your technician selects the correct pattern based on FWD layout, wheel positions, and whether the tires are directional or identical sizes front and rear. The goal is even wear and proper noise/handling characteristics. We always use the rotation sequence specified by the manufacturer for this vehicle.

• Pattern depends on drivetrain, tire design, and fitment.
• Directional or staggered tires alter allowable moves.
• Manufacturer guidance is applied to your specific set.

As a front-wheel-drive vehicle, it doesn’t always require four at once, but tread depth and the tire set’s condition determine the best approach.

If two tires are significantly more worn, a pair may be sufficient, mounted in positions that maintain stability; however, replacing four ensures even traction and handling. Your technician will measure tread depths and advise the safest option. Matched brand/model and similar tread depth across an axle are important.

• FWD can sometimes replace in pairs when appropriate.
• Equal tread depth per axle preserves stability.
• Inspection findings guide whether two or four are needed.

Replace tires when wear bars are flush with the tread, the penny test shows shallow tread, or damage/age compromises safety.

Look for the molded wear indicators in the grooves; when they align with the tread surface, it’s time to replace. Uneven wear, sidewall bulges, cuts, or persistent pressure loss also signal end of service life. A professional inspection confirms remaining tread and overall condition.

• Check wear bars and use the penny test for a quick read.
• Watch for cracks, bulges, and punctures.
• Have tread depth measured at each service visit.

Use our online portal to schedule service or call {{rooftop.phone}} to book your tire appointment.

Choose a time that fits your day, add tire rotation/inspection to your visit, and check current service specials before you confirm. You can also bundle tire care with routine maintenance to minimize trips. We’re located at 8425 W Bell Rd, Peoria, AZ 85382.

• Schedule online anytime via our service scheduler.
• Call our advisors for assistance and timing.
• Review specials to plan your visit efficiently.