2017 Hyundai Sonata Plug-in Hybrid Oil Filter in Peoria, AZ

Yes, the oil filter is replaced at each oil change to keep the 2017 Hyundai Sonata Plug-in Hybrid circulating clean, protected oil.

The filter traps debris the oil carries away; when it loads up, a bypass valve opens and oil can circulate unfiltered. That quietly accelerates wear, which is why the filter is changed with the oil. The exact timing follows the manufacturer’s maintenance schedule and your driving conditions.

• New filter installed with a fresh gasket
• Oil replaced with the manufacturer-specified grade
• Warm run and leak check before you leave

The service includes removing the old filter, cleaning sealing surfaces, installing a matched new filter with a fresh gasket, and checking for leaks after a warm run.

It’s performed alongside an oil change with the oil grade the manufacturer specifies for this engine. Technicians verify a proper seal, confirm oil level, and reset the maintenance reminder when applicable so the next interval is tracked correctly.

• Old filter removed; base and seal area cleaned
• Correct new filter fitted and torqued
• Engine warmed, inspected, and oil level confirmed

A loaded filter can trigger its bypass valve, allowing unfiltered oil to circulate and gradually increase engine wear.

While oil still flows, it no longer passes through the filter media once the bypass opens. That means abrasive particles keep recirculating through bearings and other tight clearances. Replacing the filter with the oil prevents that quiet, cumulative damage.

• Higher risk of abrasive particles in circulation
• Potential for accelerated bearing and surface wear
• Missed opportunity to reset maintenance tracking

Yes, the filter is matched to this 2.0-liter inline 4 engine, and filters are not interchangeable across different engines.

Fit, sealing, and flow characteristics must align with the engine’s design, so using a generic or incorrect filter can compromise filtration and oil pressure. We install a filter that matches this engine’s requirements without listing part numbers.

• Correct fitment for the 2.0L four-cylinder layout
• Proper sealing surfaces and gasket design
• Flow capacity suitable for this application

It can be done, but it’s not recommended because the used filter can quickly contaminate the fresh oil.

The filter holds the debris the old oil carried; keeping it in place means contaminants remain in circulation. If the filter is loaded, the bypass valve can open and the engine gets oil—but not filtered oil. Replacing both together preserves the benefit of the service.

• Fresh oil stays cleaner longer with a new filter
• Reduces the chance of bypass and unfiltered flow
• Helps maintain stable oil pressure

Book online with our quick schedule appointment tool or call the store directly.

You can pick a time, note concerns, and review available service specials before you arrive. If you prefer to speak with us, call {{rooftop.phone}} and we’ll help you set up a visit that fits your day.

• Reserve a slot via the online scheduler
• Add notes about symptoms or requests
• Confirm by phone if you need assistance