2017 Hyundai Ioniq Hybrid Oil Filter in Peoria, AZ

Yes—the oil filter is replaced with the oil on a 2017 Hyundai Ioniq Hybrid.

The filter holds the debris the oil carries away; once it loads up, the bypass valve opens and oil circulates unfiltered, which quietly increases wear. Replacing the filter each time prevents contaminants from re-entering fresh oil and helps maintain stable oil pressure. Follow the manufacturer’s schedule and your driving conditions.

• Prevents immediate contamination of new oil
• Helps avoid bypass operation and unfiltered flow
• Supports consistent lubrication and engine longevity

The service installs a matched new filter, renews sealing surfaces, fills with the specified oil, and performs a post-run leak check.

After draining the old oil, the technician removes the filter, cleans the mounting pad, oils the gasket, and installs the new filter to proper tightness. Fresh oil—of the oil grade the manufacturer specifies for this engine—is added, the engine is started, and the filter area and drain plug are inspected for leaks. Final levels are verified.

• New engine-matched filter fitted and gasket seated
• Drain plug and sealing surfaces renewed
• Post-start inspection confirms a dry, secure seal

The filter can load up, trigger the bypass valve, and circulate unfiltered oil that increases wear.

A loaded filter no longer captures debris effectively, so contaminants recirculate and can abrade bearings and cam surfaces over time. Oil pressure behavior may change, and fresh oil is quickly dirtied by what the old filter releases. Replace the filter with the oil to protect the engine and keep performance consistent in Peoria driving.

• Higher risk of abrasive wear inside the engine
• Faster contamination of newly added oil
• Potential oil pressure fluctuations under load

Yes—the filter must be matched to the 1.6-liter 4-cylinder engine; filters are not interchangeable across engines.

Correct fit and internal valve calibration ensure proper sealing, oil flow, and filtration. Using a mismatched filter can lead to leaks, poor filtration, or unintended bypass operation. At service, we select a filter designed for this engine and pair it with the oil grade the manufacturer specifies for this engine.

• Correct gasket diameter and thread for a tight seal
• Bypass valve calibrated for this engine’s needs
• Proper media area for flow and filtration balance

It can be done, but it isn’t recommended because the old filter can send contaminants into your fresh oil.

The filter traps debris; if it’s reused, the bypass valve may open sooner and allow unfiltered oil to circulate, increasing wear. Replacing both together maintains filtration efficiency and supports stable oil pressure. Follow the manufacturer’s schedule and your service history.

• Prevents old debris from contaminating new oil
• Avoids premature bypass operation
• Maintains consistent lubrication performance

Use our online portal to schedule service or call our Peoria team for assistance.

Booking online lets you choose a time, note concerns, and review service specials before you arrive. You can also coordinate around your maintenance history so the visit covers everything you need in one stop. If you prefer to speak with us, call {{rooftop.phone}}.

• Schedule your appointment in minutes online
• View available dates and transportation options
• Apply current specials to your service visit