2014 Hyundai Genesis Coupe Oil Filter in Peoria, AZ

Yes—the oil filter is replaced at each oil change so the engine resumes running on filtered oil immediately.

The filter collects debris until its bypass valve opens, after which oil flows unfiltered to maintain pressure. That quiet condition accelerates wear, which is why the filter is changed with the oil. The exact maintenance timing follows the manufacturer’s schedule and your driving profile. Replacing both together keeps service simple and effective.

• Fresh filter installed to match the 3.8‑liter V6
• New gasket and drain plug washer fitted
• Post‑start inspection checks for leaks

The service includes removing the old filter, fitting a new matched filter with a fresh gasket, and verifying a proper seal after the engine runs.

Technicians also renew the drain plug washer, refill with the oil grade the manufacturer specifies for this engine, and check for leaks at operating pressure. The level is confirmed and indicators are reset if applicable. This process ensures clean, filtered oil reaches critical components from the first restart.

• Old filter removed; sealing surfaces inspected
• New filter installed and hand‑torqued appropriately
• Engine run, leaks checked, oil level verified

A loaded filter will trigger its bypass valve, sending unfiltered oil through the engine and accelerating wear.

Unfiltered oil carries abrasive particles that can score bearings and cam surfaces over time. You may not notice immediate symptoms, but that quiet wear shortens engine life. Replacing the filter with the oil keeps debris captured and maintains consistent protection for your 3.8‑liter V6.

• Increased internal wear from recirculating debris
• Reduced oil cleanliness and protection margin
• Higher long‑term risk to precision components

Yes—the filter is matched to the 3.8‑liter V6, and filters are not interchangeable across different engines.

Correct fitment ensures proper sealing, flow, and filtration performance for the 6‑cylinder layout and its operating characteristics. Using a generic or incorrect filter risks leaks or unintended bypass. Our team installs a filter designed to work with this engine’s housing and oil system.

• Matched to displacement: 3,778 cc V6
• Correct gasket profile and mounting depth
• Designed for the engine’s flow and pressure needs

It’s possible, but not recommended because a used filter can send unfiltered oil when its bypass valve opens.

Leaving an old filter in place undermines the benefit of fresh oil and can allow debris to circulate. The manufacturer’s maintenance schedule and your driving conditions determine timing, but replacing both together is the reliable practice. It restores full filtration along with fresh oil.

• Prevents bypass events with a loaded filter
• Restores filtration and flow as a set
• Simplifies maintenance tracking

Use schedule service to book online, check service specials, or call our Peoria team for help.

Online booking lets you choose a time, note concerns, and plan transportation. If you prefer to talk, call {{rooftop.phone}}. We’re located at 8425 W Bell Rd, Peoria, AZ 85382, convenient to the Phoenix West Valley.

• Schedule appointment in minutes
• Review current service specials
• Visit our Service Center page for details