2014 Hyundai Accent Oil Filter in Peoria, AZ

Yes—the oil filter should be replaced at the same time as the oil on a 2014 Hyundai Accent.

The filter captures contaminants that the fresh oil would otherwise pick up and circulate. As a filter loads, its bypass valve can open so oil flows but is no longer filtered, which defeats the purpose of new oil. Following the manufacturer’s schedule and replacing both together preserves oil quality and engine protection between services.

• Prevents unfiltered oil from circulating after the bypass opens
• Helps maintain stable oil pressure and lubrication
• Keeps service intervals aligned for simpler maintenance tracking

The service includes draining old oil, installing a filter matched to the Accent’s engine, renewing sealing surfaces, refilling with the specified oil, and a running leak check.

Technicians remove the used filter and gasket, fit a new, properly matched filter, and torque components correctly. The engine is started to circulate oil, then areas around the filter and drain point are inspected for leaks before final level verification. You can schedule service online to plan a quick, professional visit.

• Old oil drained; new filter installed with fresh sealing
• Refill with the oil grade the manufacturer specifies
• Engine run, leak points checked, level confirmed

The filter can load with debris, trigger its bypass valve, and allow unfiltered oil to circulate through the engine.

That quiet failure mode won’t always announce itself, but contaminants can accelerate wear on bearings and cam lobes over time. Skipping the filter also leaves old trapped material to mix with fresh oil, shortening its effective life. Replacing the filter with the oil maintains proper filtration and supports long‑term reliability.

• Increased risk of abrasive particles recirculating
• Potential for unstable oil pressure and accelerated wear
• Fresh oil quality degrades faster when the old filter remains

Yes—the filter is matched to the Accent’s 1.6‑liter 4‑cylinder engine, and filters are not interchangeable across engines.

Correct fitment ensures proper sealing, flow, and bypass characteristics for this engine’s design. Using a mismatched filter risks leaks, incorrect bypass behavior, or restricted flow. At service time, we install a filter that meets the engine’s requirements without guessing part numbers or cross‑applications.

• Matched to the 1.6‑liter inline‑4’s flow and sealing needs
• Supports correct bypass valve calibration
• Reduces risk of leaks or pressure issues

It can be done, but it is not recommended because the old filter can send trapped debris back into the fresh oil.

Once the filter loads, its bypass valve may open so oil circulates unfiltered—the exact opposite of what you want after an oil change. Replacing both together preserves the protective film and helps maintain stable pressure. Follow your maintenance schedule and pair fresh oil with a new filter every time.

• Old filter can release trapped particles into new oil
• Bypass operation allows unfiltered oil to flow
• Coordinating both services protects the engine

Use our online tool to schedule appointment or call the service team in Peoria for help.

Online scheduling lets you choose a time, add notes, and arrange transportation if needed. You can also review current service specials before confirming. For questions, call {{rooftop.phone}} and we’ll assist with your 2014 Hyundai Accent.

• Book online in minutes with preferred date and time
• Review specials before you confirm
• Get phone support from our Peoria service advisors