2010 Hyundai Sonata Air Filter

The 2010 Hyundai Sonata’s engine air filter is inside a sealed airbox in the engine bay, just upstream of the intake tube and mass airflow sensor.

This panel-style element filters incoming air before it reaches the 3.3L V6 to protect the intake tract and support smooth combustion. To inspect it, release the airbox clips or screws and lift the lid carefully without stressing nearby sensors or wiring. If you prefer, a technician at Larry H. Miller Hyundai Peoria can show you the access points during your visit.

• Panel-style filter for the 3.3L V6 (engine code 6VNAG3.3)
• Access via airbox lid; ensure the perimeter gasket seats evenly
• Check for leaves, sand, and oil contamination in the airbox

The 2010 Hyundai Sonata’s cabin air filter sits behind the glove box inside the HVAC housing.

Lower the glove box by releasing its side stops to reveal the rectangular filter tray. Note the airflow arrow on the filter and housing to ensure correct orientation during reinstallation. Because the Phoenix West Valley sees dust and seasonal pollen, local drivers often inspect this filter more frequently for consistent airflow and odor control.

• Access by gently lowering the glove box; avoid forcing the tabs
• Follow the airflow arrows on both the filter and the tray
• Schedule service online via our service scheduler

The engine air filter cleans intake air for the 3.3L V6, while the cabin air filter cleans air entering the HVAC system for passengers.

The engine filter protects components like the mass airflow sensor and throttle body, helping maintain power and drivability. The cabin filter targets dust and pollen common in the Phoenix West Valley to improve what you breathe. Both are replaceable elements, and Hyundai OEM filters ensure proper fit and seal in the Sonata’s housings.

• Engine filter: supports performance and intake protection
• Cabin filter: improves in‑cabin air quality and reduces odors
• Hyundai Genuine Parts provide model‑specific fitment

Typical signs are reduced power, lower fuel economy, or a rough idle (engine filter) and weak airflow or musty odors from vents (cabin filter).

Visually, a clogged filter shows darkened, debris‑filled pleats that restrict flow. In our dusty Peoria environment, sand and organic matter can build up faster, impacting drivability or comfort. If you notice these symptoms, a quick inspection and replacement can restore performance and cabin airflow.

• Hesitation on acceleration from restricted intake airflow
• A/C fan louder than normal but with reduced vent output
• Dark, debris‑packed pleats visible on inspection

Yes—the engine filter is generally DIY‑friendly, and the cabin filter is doable with glove box access, while our Peoria team adds OEM‑spec parts and system inspections.

Many owners can swap the panel engine filter and the cabin filter at home by following the owner’s manual. Dealer service includes verifying airbox seals, inspecting ducts and the MAF sensor area, and confirming correct fitment with Hyundai OEM filters. Choose the option that fits your comfort level; we’re here if you want a quick professional install.

• Follow the manual and orientation arrows for correct seating
• Dealer includes intake/airbox checks and a MAF visual
• Schedule service for professional installation

Yes—we install genuine Hyundai OEM engine and cabin air filters that meet factory specifications.

Our factory‑authorized Hyundai Service Center uses Hyundai Genuine Parts to ensure the correct media, dimensions, and seals for your 2010 Hyundai Sonata. OEM‑certified mechanics verify proper fitment and airflow so your intake and HVAC systems perform as designed.

• Hyundai Genuine Parts sized for Sonata airbox and HVAC tray
• Installed by OEM‑certified technicians using proper procedures
• Old filters removed and disposed of appropriately

Use our online service scheduler at /service-appointment.htm to book your 2010 Hyundai Sonata air filter service in Peoria.

Choose a time that works and note any airflow or performance symptoms in your appointment comments. You can also review current offers before you come in. We’re easy to reach off Loop 101 at our Bell Road address.

• Address: 8425 W Bell Rd, Peoria, AZ 85382
• Serving Peoria, Glendale, Surprise, Sun City, Goodyear, and Phoenix
• See our service specials before scheduling

Yes—the 2010 Hyundai Sonata uses one engine air filter and one cabin air filter.

The engine filter protects the 3.3L V6 intake system, while the cabin filter cleans air for passengers from the HVAC intake. Replacing both on a sensible cadence helps maintain performance and comfort, especially with desert dust and seasonal pollen in the Phoenix West Valley.

• Engine filter located in the sealed airbox (upstream of the MAF)
• Cabin filter located behind the glove box in the HVAC housing
• We can inspect both during routine service on request

Our service is designed for accuracy and clean airflow throughout your 2010 Hyundai Sonata. We begin by confirming your vehicle details and accessing the sealed airbox to remove and inspect the engine air filter. The housing and ducts are checked for debris, gasket condition, and proper sealing before installing a Hyundai OEM filter. Next, we access the cabin air filter behind the glove box, remove the filter tray, and replace the element following the airflow markings. A visual inspection of the mass airflow sensor area and intake connections helps prevent unmetered air leaks. We then reassemble, verify fitment, and review findings with you so you leave with clear next steps. Ready to proceed? Schedule service today.

The 2010 Hyundai Sonata 3.3L V6 (engine code 6VNAG3.3) uses a panel‑style engine air filter inside a sealed airbox and a rectangular cabin air filter mounted in the HVAC housing behind the glove box. Hyundai Genuine Parts provide the correct media, perimeter gasket, and dimensions for a proper seal and stable airflow. Follow the maintenance guidance in your owner’s manual for replacement timing, and consider more frequent inspections if you regularly drive in dusty or high‑pollen areas around the Phoenix West Valley. Using the correct OEM filters supports mass airflow sensor accuracy, throttle response, and cabin air cleanliness. Bring your 2010 Hyundai Sonata to Larry H. Miller Hyundai Peoria in Peoria for OEM‑spec filter service — schedule service.

We proudly serve drivers from Peoria, Glendale, Surprise, Sun City, Goodyear, and Phoenix with factory‑authorized Hyundai care focused on local conditions. Desert dust, construction particulates, and seasonal pollen can load both engine and cabin filters faster, so timely inspection helps maintain performance and in‑cabin comfort. Our OEM‑certified mechanics use Hyundai Genuine Parts and proven procedures to ensure each filter seats correctly and seals against bypass. Visit us off Loop 101 at 8425 W Bell Rd, Peoria, AZ 85382, or use our online tools to plan your visit. For value, review current offers on our service specials page and then schedule your appointment for your 2010 Hyundai Sonata.